Fenwal
bimetal thermostats are available
as surface mount or probe type with factory pre-set actuation
temperatures of 2° C
to 288 ° C. Narrow temperature differentials and tolerances
and a wide range of mounting & termination configurations
are available to meet specific design requirements.
A snap-acting bimetal disc is the actuating
element in these rugged and long-life precision devices. Each
thermostat is individually calibrated and tested.
The surface mount thermostat is ideal
for temperature limiting and simple control applications.
The probe type thermostat is designed
for direct insertion into the medium being sensed. The bimetal
disc is enclosed in the tip of the probe to provide fast thermal
response and rapid, positive contact action at the preset temperature.
. |
Series 08-02
Standard Model |
-
- Download:
- Snap
Disk 08-02.pdf
|
|
|
Features:
Vibration and shock resistant
Automatic reset
Individually factory calibrated & tested
Non-adjustable, factory preset temperature
Fine silver contacts for long-life
Specifications
Calibrated settings from 35° to 350°F (2°C to 176°C)
100,000 cycling rating
Standard model (08-02) with ratings to 12A @ 120/240 VAC
Low profile model (08-01), 6.35 mm (0.20") height with ratings
to 7A @ 120/240 VAC
Agency Approvals
UL, CSA |
|
Series 08-03 |
-
-
- Download:
- Snap
Disk 08-03
|
|
|
Features
High temperature model with ceramic case
Stainless steel cap and flange
Vibration and shock resistant
Automatic reset
Individually factory calibrated & tested
Non-adjustable, factory preset temperature
Fine silver contacts for long-life
Specifications
Calibrated settings from 240° to 550°F (116° to 288°C)
100,000 cycling rating
Ratings to 10A at 120/240 VAC
Agency Approvals
UL, CSA |
|
Series 08-81
8 21 8
Standard Model |
-
-
- Download:
- Datasheet
08-81
|
|
|
Features
100% factory temperature tested
Snap-action switching
Hermetically sealed
Shock and vibration resistant
High contact force and excellent wiping action of the contacts
combine to make the probe suitable for light loads of 100 milliamperes
or less
Specifications
Tamper-proof, preset temperatures from 35° to 350°F (2°
to 177°C)
Ratings to 5A at 120/240 VAC resistive
Agency Approvals
CSA |
Series 08-80
High Temperature |
-
-
- Download:
- Datasheet
08-80
|
|
|
- Features
High temperature
All welded, stainless steel construction
Hermetically sealed contact area
Individually calibrated and factory tested
Vibration & shock resistant sufficient to meet MIL-STD-202,
Method 204, Condition D
High contact force and excellent wiping action of the contacts
combine to make the probe suitable for light loads of 100 milliamperes
or less
Specifications
Tamperproof, pre-set temperature calibrated settings from
- 240° to 500°F (-116° to 260°C)
100,000 cycling rating
Ratings to 5A @ 120/240 VAC
Agency Approvals UL,CSA
|